PROMIG-500SYN DPulse Heavy Industrial High Speed Pulse MIG Welder
プロパティ
- Input Voltage
- 3PH ~ 400V ±15%
- Rated Output(40℃) 100%
- MIG: 500A/39V
- Features
- High Speed Pulse, Ultra Low Spatters, Hybrid Pulse
評価
製品の説明
DETAILS
ULTRA HIGH DEPOSITION RATE, ULTRA HIGH WELDING PERFORMANCE
PROMIG-500SYN DPulse
Heavy Industrial Design - 500A @ 100% Duty cycle.
Pulse & Double Pulse MIG Process - Welds Mild steel, Stainless Steel, 4XXX and 5XXX series aluminum for superior quality welding.
(HSP) High Speed Pulse MIG - Improve the Welding Efficiency Up-to 48%.
(HPC) Hybrid Pulse Control - Great performance for all pipe welding solutions.
(ULS) Ultra Low Spatters- Up to 75% less spatter.
HSP—High Speed Pulse Technology
Specifically designed for demanding workshop use, the deposition rate can increase 25~30% for various materials, whether used in manufacturing thick materials or sheet metal.
The High Speed Pulse (HSP) process enables you to save time, money, and energy compared to traditional pulse welding. This process is ready to raise pulse welding to a whole new level!
In general, One pulse melt one droplet, but we increase the submission of these droplets by TOPWELL's New High Speed pulse process.The transition will be faster, narrower HAZ zone and deeper penetration!
GET HIGHER WELDING STRENGTH
Deeper penetration, No Undercut defects, Higher strength.
HSP VERTICAL-UP WELDING PROCESS
The HSP optimised for fillet welds (FW) completed using PF welding (in vertical up position), can also be used to great benefit in other weld positions. For Topwell ProMIG Series, HSP is approx 70 % faster, an enormous progress for everyone welding a vertical seam. A whole new level!
No need to swing! No undercuts or other defects! The speed of PF welding by HSP is twice that of the traditional pulse welding.
Double Pulse MIG process
No need to swing, You can easily get a cosmetically pleasing weld seam, with significantly lower and more controller heat input into the workpiece. It results in much lower distortion and less rework, very suitable for welding the thin Aluminum or S.S sheets.
HPC—Hybrid Pulse Control
(HPC) Hybrid Pulse Control is TOPWELL unique technology, it mixes Pulse (spray arc) and short-circuit transfer types in one duty cycle. With the outstanding process, it keeps the advantage of both transfer types and provides a great performance for all pipe welding solutions. Vertical-up positions are also highly recommended.
ULS—Ultra Low Spatters
Short Arc is a wire transfer method which is frequently used for welding thin materials less than 3mm and is by nature is a welding process that produces spatter which can adhere to parts, welding jigs, inside the nozzle requiring additional clean up time. Most of the spatter is produced when the process changes state between shorting and arcing which can occur over one hundred times per second. This change results in huge changes in are to control the volatility during the change of state between short and arc to control the amount and size of the spatter generated.
HSS—High Speed Spot Technology
Comparing with the standard spot welding, High Speed Spot is an great improvement. It offers a faster travel speed and better welding performance, especially for thin (less than 2mm) pipes or frame/structure welding jobs, like the furnitures etc.
Robot Welding Ready
The PROMIG-500SYN DPulse system is able to work with robot.
Capable for 485 protocol.
VIDEO
SPECIFICATIONS
Machines
|
Product Name
|
ProMIG-500SYN DPulse
|
|
Machines Processes
|
Stick (SMAW) Flux-Cored (FCAW)
MIG (GMAW) Pulsed MIG (GMAW-P) Double Pulsed MIG (GMAW-DP) High Speed Pulsed MIG (GMAW-HSP) |
|
Machines Communication
|
Analog
Digital Wifi |
|
Wire Feeder
|
4-Rollers
|
Product Weights & Dimensions
|
Dimensions(L*W*H)
|
960x420x1400mm
|
|
Net Weight
|
107kg
|
Basic Specification
|
Input Voltage
|
3PH ~ 400V ±15%
|
|
Input Power
|
24.08KVA
|
|
Output Range
|
MIG: 30A/15.5V~500A/39V
|
|
Rated Output(40℃) 100%
|
MIG: 500A/39V
|
Polarity | DC |
YOU MAY ALSO NEED
Push Pull 401W
SGT 18
Foot Pedal
Carriage